*How Does A Pole Saw Work*
How Does A Pole Saw Work: Maintaining Trees Has Never Been More Effortless
In this video, you will learn how does a pole saw work when cutting or trimming branches.
1. Put your safety equipment first
Make sure that you wear your goggles, earplugs, gloves, and helmet, as falling objects are a common occurrence when operating pole saws. It is essential that you ensure that you also wear the right footwear and clothing, as safety shouldn’t be half-hearted. Flip-flops aren’t an ideal attire for gardening jobs like cutting or pruning. Likewise, protective gear and attires will protect you from further injuries if indeed you meet an accident.
2. Prepare the area for using a pole saw
After ensuring your safety measures, you should make sure that there are no risks or trip hazards that could lead to a potential injury. Keep a designated cordon around the area where you intend to work, such that it is marked should someone wander nearby.
3. Power up your pole saw
Now comes the time to plug in your pole saw while ensuring that the power cord is away from your legs for avoiding a trip hazard.
4. Plan where you want to cut the branches
With a clear plan in mind, target the branches and vines that are smaller and within your immediate reach. Position the pole saw and then press the trigger before holding the saw against the wood and then pressing down firmly.
Clear each piece of wood as you cut the branch. Avoid littering the floor with the chopped limbs, as it’ll undo all the preparation you did before cutting the branches.
5. Cut the thick branches
Once you’ve cleared out the smaller branches near to you, now it’ll be time to attack the thicker limbs on the higher end. You shouldn’t try and cut those limbs in one swoop. Instead, make a groove cut at around 45-degree and followed by a straight cut such that the tip of the V joins. Take the pole saw and place it to the point of the groove and slowly slice through the branch before increasing the speed gradually.
6. Power off once you’re done cutting or pruning
Once you have removed all the unwanted branches and bushes, release the trigger, and unplug the pole saw. Ensure that the pole saw has completely stopped moving before you go near. Then remove the safety gear and clean the area.