California Garden TV: How to Build a HINGED HOOP HOUSE for a Raised Bed

In this video I’m showing you how to make a simple DIY hinged hoop house for a raised bed.

Check out the School Of Traditional Skills: https://bit.ly/3zoFWy1

Video: How to Make a Simple, Cheap Raised Bed: https://youtu.be/EiR20Dqad6U?si=xRb9B0kZ9wrr65OY

Hoop House Frame Parts List:
• Two 8 Foot Long 2 x 4’s- These will form the length of the hoop house.
• Two, 41 Inch 2 x 4’s – These will form the width of the hoop house.
• 3 Inch Decking Screws – Use these to attach the boards to the frame firmly.
• 4 “L” Brackets
• 1⁄2 Inch PVC – This will form the arches of the hoop house.
• 6 End Caps for 1⁄2 Inch PVC – These will hold the PVC frame in place on your hoop house frame.
• Coated 1 5⁄8 Inch Screws – Use these to attach the end caps to the frame.
• 1⁄2 Inch PVC T-Connectors – Used to connect the four pieces of each arch of the hoop house.
• PVC Cross Connectors – Use for the center arch of your hoop house.
• PVC Cutter – Use to cut the PVC pipe into 16-inch pieces.
• Two 8-foot Long Furring Strips – Used to hold the plastic covering to the frame of the hoop house.
• Two 43 Inch Furring Strips – Used to hold the plastic covering to the frame of the hoop house.
• 10 Foot by 25 Foot Roll of 6 Mil Plastic Sheeting – Used to cover the hoop house.
• Two 3 Inch Metal Hinges – Used to attach the hoop house to the frame.
• Handle – Any handle will work. This will make it easier to open your hoop house.
• 2 Screw Eyes – Used to secure a rope between the raised garden bed and the hoop house frame.
• Rope – Used to attach the frame of the hoop house and the frame of the raised bed.